DURAN® GLS 80® Stirred Bottle Reactor Set, wide mouth, complete with:

- 1000 mL bottle (clear),
- 1x GLS 80® screw cap (PP, blue/grey),
- 1x GL 14 screw cap (PP, blue),
- 2x GL 14 screw cap (PBT, red),
- 2x GL 18 screw cap (PBT, red),
- Anchor magnetic stirrer

Features:
- Manufactured from chemically resistant materials: PP, PTFE, PEEK, stainless steel
- Drive with standard magnetic stirrers up to 500 rpm and allows improved mixing compared to stir bars
- The variable stirrer shaft can be vertically adjusted to the optimal position in either 500, 1000 or 2000 ml DURAN® GLS 80® bottles
- A shorter stirrer shaft is available for the 250 ml DURAN® GLS 80® bottles
- The 4x threaded ports (2x GL 14 and 2x GL 18) can be blanked off or used for connecting tubing or measurement probes
- Flexible: The proven DURAN® GL 45 / GLS 80 connection system components (2x GL 14 and 2x GL 18) can be used with 1.6 to 12.0 mm outer diameter semi-rigid tubing to add or remove liquid or gas during the mixing process
- Fully Autoclavable components
- Food-contact safe materials

THE DURAN® GLS 80® STIRRED REACTOR

The GLS 80® stirred reactor is suitable for a wide range of laboratory mixing processes. The connections (2x GL 14 and 2x GL 18) provided permit addition or removal of media from the bottle during the mixing process. The whole unit can be autoclaved and is therefore suitable for biological applications. By using components from the GLS 80® connection system, an additional media bottle (Tubing outer diameter: 1.6–12.0 mm) can be connected or a sterile pressure equalizer attached. Drive for the stirrer may provided by a standard commercial magnetic stirrer. The variable stirrer shaft can be used in DURAN® GLS 80® laboratory glass bottles (1000 mL and 2000 mL) and provides notably improved mixing in comparison with standard magnetic stir bars. The stirrer unit is interchangeable and can be used up to 500 rpm is possible.

Typical applications: mixing of liquids, dissolving of solids, simple fermentation processes.